Created ESP32-WROVER-EVB based on Open Sourced Olimex ESP32-EVB: Ethernet, MicroSD, IR, Relays, CAN, UEXT, and now 16 MB Flash/4 MB RAM for low.js or MicroPython

Our Open Source framework low.js is a port of Node.JS for ESP32 based microcontrollers. With low.js we are bringing ease of programming, scalability of programs and easy connectability to the Internet on to small devices. The ESP32 is a great target, because it is powerful, yet low cost. It provides Wifi out-of-the-box, also Ethernet jack support,…

low.js (free Node.JS port) arguably provides the cheapest option to build electronics for many companies, and now we also provide the best tools for doing this

low.js is a port of Node.JS for ESP32 based microcontrollers. With low.js we are bringing ease of programming, scalability of programs and easy connectability to the Internet on to small devices. To get straight to the point… Cheapest unit costs for most network-connected electronics The ESP32 chip, introduced by Espressif in 2016 is powerful (240…

Newsletter / September 23th, 2019

With this newsletter we are highlighting some of the developments which were important for us in the last month. If you would like to receive future newsletters per e-mail, please register in the form in the top right of our low.js homepage. With low.js stable and usable, we are now concentrating on requests of users. Paying…

Newsletter / August 15th, 2019

With this newsletter we are highlighting some of the developments which were important for us in the last month. If you would like to receive future newsletters per e-mail, please register in the form in the top right of our low.js homepage. What’s this about? low.js is a port of Node.JS for (ESP32 based) microcontrollers. With…

Newsletter / June 19th, 2019

With this newsletter we are highlighting some of the developments which were important for us in the last month. If you would like to receive future newsletters per e-mail, please register in the form in the top right of our low.js homepage. What’s this about? low.js is a port of Node.JS for (ESP32 based) microcontrollers. With…

Cancelling the IoT Electronics Kit in favor of a bright future for low.js

The important message right away: We finally decided to cancel the IoT Electronics Kit and refund all pre-orders via PayPal +5 % as a small compensation. If you pre-ordered via Kickstarter, please send your PayPal address to info@neonious.com and we will refund right away. Also, if you still would like to try out the neonious one, we can offer…

Newsletter / May 8th, 2019

With this newsletter we are highlighting some of the developments which were important for us in the last month. If you would like to receive future newsletters per e-mail, please register in the form in the top right of our low.js homepage. CAN support low.js now has a simply to use, but fully featured module built-in…

Built a RC car which can be controlled by touch using a cell phone.

Built with some electronics and programmed with just a few lines of JavaScript code. How it was done: The hardware I took an off-the-shelf RC car. I removed the chassis and threw away the electronics board inside. I kept the bottom frame with the battery compartment, the motor and the wheels. The steering was done…